Deko-Light Alwaid Pro White | LED Stair Lighting Recessed | 4W Dimmable

Alwaid Pro White: LED stair lighting that disappears flush into the wall

The Deko-Light Alwaid Pro is a compact recessed wall spot designed for stair lighting. The spot is mounted in the wall next to the stairs and illuminates the steps from the side. Nothing protrudes from the wall: you see a flat cover of 75 mm and the light on the step, and you do not look directly into the light source.

With a mounting hole of only Ø68 mm, the Alwaid Pro fits into a standard recessed box. The spot works directly on 230V, is dimmable, and comes with an interchangeable cover in white.

One spot, four different light patterns

You determine the light pattern yourself with the cover you choose. All covers fit on the same spot and can be easily interchanged later:

• Square, wide beam: a broadly fanned beam across the step. The most popular version for stair lighting, as it covers the entire width of the step.
• Round, narrow beam: a narrower, directed beam downwards. Calm and subtle, beautiful if you place the spots in a row along a long wall.
• Square glass, diffuse light: a square cover of frosted glass. The spot itself lights up softly and provides orientation light instead of a beam on the step.
• Round glass, diffuse light: the same soft light pattern, but with a round shape.

The aluminum covers are finished in white, matching the color of the spot (traffic white RAL 9016). Do you want a different light pattern later or a black finish? Then you only need to change the cover. View all separate covers for the Alwaid Pro.

Fits in a standard flush-mounted box or junction box

The spot is always mounted in a flush-mounted box, not loosely in a cut-out hole. Saw size Ø68 mm, installation depth 39 mm. We have installed it in a standard junction box 50 mm deep: it fits perfectly, including the wiring behind it. The screw holes align exactly with those of a standard box, so you can easily screw it in.

If there is already a box in your wall, for example from an old wall light in the hallway, you can use it. Looping is possible, so you can easily connect multiple spots to one circuit. You can find the corresponding connection material here.

Please note: this luminaire falls under protection class I. The connection must therefore be earthed.

Directly on 230V, no separate driver needed

The power supply is built into the spot. You can therefore connect the Alwaid Pro directly to 230V, without a separate LED driver above the ceiling or behind the wall. If you want to be able to dim, you replace the switch with a regular LED dimmer.

How many spots do you need?

Allow for one spot per three to four steps. For an average staircase of 14 to 16 steps, that means 4 or 5. One spot illuminates more than just the step below it: the beam extends over approximately one meter of the staircase. If you want a tighter, more even rhythm, go for one spot per two steps. One spot per step creates a continuous line of light and is mainly seen in designer staircases.

Place them about 20 to 30 cm above the step. If your staircase has a turn or a landing, make sure to place one at the bottom step, one on the landing, and one at the top step: these are the places where people are most likely to miss their footing.

If you are unsure between two quantities, start with the lowest. The light from these spots is generous for a stairwell, especially with a wide beam. You can always order an additional spot later.

Also for hallways, corridors, basements, and bedrooms

The same spot works well wherever you want low, directed light without a lamp protruding from the wall: along a long hallway, in a corridor, in the basement, or as a subtle night light along the floor in the bedroom. With a glass cover, the spot becomes a subtle orientation light.

Warm white light and 5-year manufacturer's warranty

The fixed LED module emits warm white light of 2700K: easy on the eyes and pleasant for nighttime use. Because only 4W is dissipated in a generously sized aluminum housing, the LED module remains cool and operates well below its maximum. In practice, this is the main reason why an LED module maintains its light output for a long time. Deko-Light offers a 5-year manufacturer's warranty on the Alwaid Pro.