Productomschrijving
Alwaid Pro Motion White: Stair lighting that turns on automatically
The Deko-Light Alwaid Pro Motion is a recessed wall light with a built-in motion sensor. You install the spot in the wall next to the stairs, and it automatically switches on as soon as you approach. No fumbling for a switch in the dark, no harsh ceiling light in the middle of the night: just light on the steps, exactly when you need it.
With a mounting hole of just Ø68 mm, the Alwaid Pro Motion fits into a standard flush-mounted box. The spot operates directly on 230V; a separate sensor or driver is not required.
Motion sensor in every spot
Each Alwaid Pro Motion has its own motion detector (IR/HF) with a detection range of 1 to 3 meters and a detection angle of 120°. Each spot reacts independently to movement in its own zone. As you walk up the stairs, the steps light up with you.
With the power switch, you can set the wattage to 2W or 4W: 2W for a calm, soft light level, 4W for full light output.
This version is ideally suited if your box only has a permanent live wire and no switched wire. You won't need to break open any wiring. If you want the entire staircase to light up and stay on at once, choose the Alwaid Pro without a sensor and switch it with a regular switch or dimmer.
One spot, four different light patterns
You determine the light pattern yourself with the shroud you choose. All shrouds fit the same spot and can be easily interchanged later:
- Square, wide beam: a wide-spreading beam across the step. The most popular choice for stair lighting.
- Square, narrow beam: a narrower, focused beam downwards. Calm and subtle along a long wall.
- Square glass, diffuse light: a square frosted glass cover. The spot lights up softly and provides orientation light instead of a beam.
- Round glass, diffuse light: the same soft light pattern, but with a round shape.
The aluminum shrouds have a white finish in the same color as the spot (traffic white RAL 9016). View all individual shrouds for the Alwaid Pro Motion.
Fits in a standard flush-mounted box or junction box
The spot is always mounted in a flush-mounted box, not loosely in a cut-out hole. Saw size Ø68 mm, installation depth 39 mm. We have installed it in a standard junction box 50 mm deep: it fits perfectly, including the wiring behind it. The screw holes align exactly with those of a standard box, so you can easily screw it in place.
If there's already a box in your wall, for example from an old wall light in the hallway, you can use that. Looping is possible, so you can easily connect multiple spots to one circuit. The corresponding connection material can be found here.
Please note: this fixture falls under protection class I. The connection must therefore be earthed.
How many spots do you need?
For stair lighting, you typically place one spot every two to three steps, approximately 20 to 30 cm above the step. For an average staircase of 13 to 16 steps, this amounts to 5 to 8 spots. Because each spot has its own sensor with a range of 1 to 3 meters, this will cover the entire staircase.
Also for hallways, corridors, basements, and toilets
A spot that turns on by itself is also useful in a hallway, corridor, basement, storage room, or utility room. Anywhere you walk with full hands or where light is only needed for a short time, a sensor saves you from needing a switch.
Warm white light and 5-year manufacturer's warranty
The fixed LED module provides warm white light of 2700K: gentle on the eyes and pleasant for nighttime use. Because only 2 to 4W is dissipated in a generously sized aluminum housing, the LED module stays cool and operates far below its maximum. In practice, this is the main reason an LED module maintains its light output for a long time. Deko-Light provides a 5-year manufacturer's warranty on the Alwaid Pro Motion.
